Home >> Air Purifying Series >> Efficient refrigeration dryer
I. Brief Introduction
    Weiton is a research and development, production and sales of high-tech enterprises, research over the years committed to the gas system and gas development, by virtue of the excellent design and perfect the production process control, timely and thoughtful service to sell, the product was numerous domestic and international famous enterprises selected. In response to the call of the national energy saving, is to develop a new generation of environmentally friendly energy-saving cold and dry machine.
II. The internal structure 
III. Features
    1. Back to Win a unique design, better, non-condensing export pipeline. 
    2. Dew point in the complex remained stable conditions ,2-10 ℃ 
    3. Compared with ordinary models, the same conditions selected smaller compressors, energy conservation. 
    4. The use of new environment-friendly refrigerant, to protect the environment. 
    5. At the top of the ventilation design is conducive to export hot air to avoid a situation where the Second heating. 
    6. Cold and dry machine in accordance with the automatic adjustment of the load cooling capacity to ensure that the quality of gas. 
    7. Hot gas bypass valve in a dynamic equilibrium, evaporation pressure stable, reducing the compressor load, to achieve energy conservation and the prevention of the effects of freezing.
Ⅳ. The system processes
V. Selection guide
    1. ambient temperature air-cooled standard type: 32 ℃ -35 ℃ .
    2. water-based pressure standard: 0.25Mpa-0.4Mpa .
    3. inlet temperature: ≤ 60 ℃ .
    4. air pressure: 0.4Mpa-1.0Mpa (ultra-high pressure models use the high-pressure) .
    5. capacity of the environment: dry, well-ventilated and dust-free place of.
VI. Notes
    1. for the compressed air from the upper reaches of the solid oil, such as acrobatic parts of the heat exchanger pollution, cold and dry in front of the best configuration of a charge of passing through the filter: 
    2. the system should be to install a bypass valve equipment to facilitate maintenance and repair; 
    3. drying equipment should be surrounded by more than 1M space, cooling and ventilation so as to facilitate maintenance; 
    4. the maximum ambient temperature shall not exceed 45 ℃.
Ⅶ. Technical parameters